304 is a chromium-nickel austenitic stainless steel with great quality and amazing consumption protection as provided in the strengthened condition with a regular brinell hardness of 175.Characterised by high erosion protection by and large air destructive situations it shows magnificent protection from most oxidizing specialists, general foodstuffs, disinfecting arrangements, dyestuffs, most natural chemicals, in addition to a wide assortment of inorganic chemicals additionally hot oil gases, steam ignition gases, nitric corrosive and to a lesser degree sulphuric corrosive. It shows great oxidation protection at hoisted temperatures and has fantastic weldability.
304 can't be solidified by warm treatment, yet quality and hardness can be expanded considerably by icy working, with resulting lessening in pliability. It is currently accessible with enhanced machinability (by calcium infusion treatment) which has little effect on consumption protection and weldability, while incredibly expanding nourishes and additionally speeds in addition to broadening apparatus life.
Surface Roughness | Ra0.2 μm ~ Ra0.4 μm |
---|---|
Hard Chrome Thickness | 20 Micron ±10% |
Length | 2M - 6M |
Size | 6Φ ~ 200Φ |
Material | SUS304, SUS316, SUS410 |
Classification | Specification | Chemical Composition | other | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
JIS | AISI | C | Si | Mn | P | S | Ni | Cr | Mo | Cu | N | ||
Martensitic Grades | SUS403 | 403 | Max.0.15 | Max.0.50 | Max.1.00 | Max.0.040 | Max.0.030 | (1) | 11.50~13.00 | - | - | - | - |
SUS410 | 410 | Max.0.15 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | (1) | 11.50~13.50 | - | - | - | - | |
SUS410J1 | - | 0.08~0.18 | Max.0.60 | Max.1.00 | Max.0.040 | Max.0.030 | (1) | 11.50~14.00 | 0.30~0.60 | - | - | - | |
SUS410F2 | - | Max.0.15 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | (1) | 11.50~13.50 | - | - | - | Pb 0.05˜0.30 | |
SUS416 | 416 | Max.0.15 | Max.1.00 | Max.1.25 | Max.0.060 | Min.0.15 | (1) | 12.00~14.00 | (2) | - | - | - | |
SUS420J1 | 420 | 0.16~0.25 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | (1) | 12.00~14.00 | - | - | - | - | |
SUS420J2 | 420 | 0.26~0.40 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | (1) | 12.00~14.00 | - | - | - | - | |
SUS420F | 420F | 0.26~0.40 | Max.1.00 | Max.1.25 | Max.0.060 | Min.0.15 | (1) | 12.00~14.00 | (2) | - | - | - | |
SUS420F2 | - | 0.26~0.40 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | (1) | 12.00~14.00 | - | - | - | Pb 0.05~0.30 | |
SUS431 | 431 | Max.0.20 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | 1.25~2.50 | 15.00~17.00 | - | - | - | - | |
SUS440A | 440A | 0.60~0.75 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | (1) | 16.00~18.00 | (3) | - | - | - | |
SUS440B | 440B | 0.75~0.95 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | (1) | 16.00~18.00 | (3) | - | - | - | |
SUS440C | 440C | 0.95~1.20 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | (1) | 16.00~18.00 | (3) | - | - | - | |
SUS440F | S44020 | 0.95~1.20 | Max.1.00 | Max.1.25 | Max.0.060 | Min.0.15 | (1) | 16.00~18.00 | (3) | - | - | - | |
Ferritic Grades | SUS405 | 405 | Max.0.08 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | - | 11.50~14.50 | - | - | - | Al 0.10~0.30 |
SUS410L | - | Max.0.03 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | - | 11.00~13.50 | - | - | - | - | |
SUS430 | 430 | Max.0.12 | Max.0.75 | Max.1.00 | Max.0.040 | Max.0.030 | - | 16.00~18.00 | - | - | - | - | |
SUS430F | 430F | Max.0.12 | Max.1.00 | Max.1.25 | Max.0.060 | Min.0.15 | - | 16.00~18.00 | (2) | - | - | - | |
SUS434 | 434 | Max.0.12 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | - | 16.00~18.00 | 0.75~1.25 | - | - | - | |
SUS447J1 | - | Max.0.01 | Max.0.40 | Max.0.40 | Max.0.030 | Max.0.020 | - | 28.50~32.00 | 1.50~2.50 | - | Max.0.015 | - | |
SUSXM27 | - | Max.0.01 | Max.0.40 | Max.0.40 | Max.0.030 | Max.0.020 | - | 25.00~27.50 | 0.75~1.50 | - | Max.0.015 | - | |
Austenitic Ferritic Grades | SUS329J1 | 329 | Max.0.08 | Max.1.00 | Max.1.50 | Max.0.040 | Max.0.030 | 3.00~6.00 | 23.00~28.00 | 1.00~3.00 | - | - | - |
SUS329J3L | S31803 | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.040 | Max.0.030 | 4.50~6.50 | 21.00~24.00 | 2.50~3.50 | - | 0.08~0.20 | - | |
SUS329J4L | S31260 | Max.0.03 | Max.1.00 | Max.1.50 | Max.0.040 | Max.0.030 | 5.50~7.50 | 24.00~26.00 | 2.50~3.50 | - | 0.08~0.30 | - | |
Austenitic Grades | SUS201 | 201 | Max.0.15 | Max.1.00 | 5.50~7.50 | Max.0.060 | Max.0.030 | 3.50~5.50 | 16.00~18.00 | - | - | 0.25?? | - |
SUS202 | 202 | Max.0.15 | Max.1.00 | 7.50~10.00 | Max.0.060 | Max.0.030 | 4.00~6.00 | 17.00~19.00 | - | - | Max.0.25 | - | |
SUS301 | 301 | Max.0.15 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 6.00~8.00 | 16.00~18.00 | - | - | - | - | |
SUS302 | 302 | Max.0.15 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 8.00~10.00 | 17.00~19.00 | - | - | - | - | |
SUS303 | 303 | Max.0.15 | Max.1.00 | Max.2.00 | Max.0.200 | Min.0.15 | 8.00~10.00 | 17.00~19.00 | (2) | - | - | - | |
SUS303Se | 303Se | Max.0.15 | Max.1.00 | Max.2.00 | Max.0.200 | Max.0.060 | 8.00~10.00 | 17.00~19.00 | - | - | - | Se Min.0.15 | |
SUS303Cu | - | Max.0.15 | Max.1.00 | Max.3.00 | Max.0.200 | Min.0.15 | 8.00~10.00 | 17.00~19.00 | (2) | 1.50~3.50 | - | - | |
SUS304 | 304 | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 8.00~10.50 | 18.00~20.00 | - | - | - | - | |
SUS304L | 304L | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 9.00~13.00 | 18.00~20.00 | - | - | - | - | |
SUS304N1 | 304N | Max.0.08 | Max.1.00 | Max.2.50 | Max.0.045 | Max.0.030 | 7.00~10.50 | 18.00~20.00 | - | - | 0.10~0.25 | - | |
SUS304N2 | - | Max.0.08 | Max.1.00 | Max.2.50 | Max.0.045 | Max.0.030 | 7.50~10.50 | 18.00~20.00 | - | - | 0.15~0.30 | Nb Max.0.15 | |
SUS304LN | 304LN | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 8.50~11.50 | 17.00~19.00 | - | - | 0.12~0.22 | - | |
SUS304J3 | - | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 8.00~10.50 | 17.00~19.00 | - | 1.00~3.00 | - | - | |
SUS305 | 305 | Max.0.12 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 10.50~13.00 | 17.00~19.00 | - | - | - | - | |
SUS309S | 309S | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 12.00~15.00 | 22.00~24.00 | - | - | - | - | |
SUS310S | 310S | Max.0.08 | Max.1.50 | Max.2.00 | Max.0.045 | Max.0.030 | 19.00~22.00 | 24.00~26.00 | - | - | - | - | |
SUS316 | 316 | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 10.00~14.00 | 16.00~18.00 | 2.00~3.00 | - | - | - | |
SUS316L | 316L | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 12.00~15.00 | 16.00~18.00 | 2.00~3.00 | - | - | - | |
SUS316N | 316N | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 10.00~14.00 | 16.00~18.00 | 2.00~3.00 | - | 0.10~0.22 | - | |
SUS316LN | 316LN | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 10.50~14.50 | 16.50~18.50 | 2.00~3.00 | - | 0.12~0.22 | - | |
SUS316Ti | - | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 10.00~14.00 | 16.00~18.00 | 2.00~3.00 | - | - | Ti Min.5xC% | |
SUS316J1 | - | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 10.00~14.00 | 17.00~19.00 | 1.20~2.75 | 1.00~2.50 | - | - | |
SUS316J1L | - | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 12.00~16.00 | 17.00~19.00 | 1.20~2.75 | 1.00~2.50 | - | - | |
SUS316F | - | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Min.0.10 | 10.00~14.00 | 16.00~18.00 | 2.00~3.00 | - | - | - | |
SUS317 | 317 | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 11.00~15.00 | 18.00~20.00 | 3.00~4.00 | - | - | - | |
SUS317L | 317L | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 11.00~15.00 | 18.00~20.00 | 3.00~4.00 | - | - | - | |
SUS317LN | - | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 11.00~15.00 | 18.00~20.00 | 3.00~4.00 | - | 0.10~0.22 | - | |
SUS317J1 | - | Max.0.04 | Max.1.00 | Max.2.50 | Max.0.045 | Max.0.030 | 15.00~17.00 | 16.00~19.00 | 4.00~6.00 | - | - | - | |
SUS836L | - | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 24.00~26.00 | 19.00~24.00 | 5.00~7.00 | - | Max.0.25 | - | |
SUS890L | - | Max.0.02 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 23.00~28.00 | 19.00~23.00 | 4.00~5.00 | 1.00~2.00 | - | - | |
SUS321 | 321 | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 9.00~13.00 | 17.00~19.00 | - | - | - | Ti Min.5xC% | |
SUS347 | 347 | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 9.00~13.00 | 17.00~19.00 | - | - | - | Nb Min.10xC% | |
SUSXM7 | 304Cu | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 8.50~10.50 | 17.00~19.00 | - | 3.00~4.00 | - | - | |
SUSXM15J1 | - | Max.0.08 | 3.00~5.00 | Max.2.00 | Max.0.045 | Max.0.030 | 11.50~15.00 | 15.00~20.00 | - | - | - | - | |
Precipitation Hardening Grades | SUS630 | S17400 | Max.0.07 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | 3.00~5.00 | 15.00~17.50 | - | 3.00~5.00 | - | Nb 0.15~0.45 |
SUS631 | S17700 | Max.0.09 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | 6.50~7.75 | 16.00~18.00 | - | - | - | Al 0.75~1.50 |
Type | UNS | Tensile (ksi) min |
Yield (ksi) min |
Elongation min |
Hardness (Brinell) max |
Hardness (Rockwell B) max |
302 | S30200 | 75 | 30 | 40% in 2" | 183 | 88 |
304* | S30400 | 75 | 30 | 40% in 2" | 183 | 88 |
304L* | S30403 | 70 | 30 | 40% in 2" | 183 | 88 |
309 | S30900 | 75 | 30 | 40% in 2" | 217 | 95 |
309S | S30908 | 75 | 30 | 40% in 2" | 217 | 95 |
310 | S31000 | 75 | 30 | 40% in 2" | 217 | 95 |
310S | S31008 | 75 | 30 | 40% in 2" | 217 | 95 |
316* | S31600 | 75 | 30 | 40% in 2" | 217 | 95 |
316L* | S31603 | 70 | 25 | 35% in 2" | 217 | 95 |
317 | S31700 | 75 | 30 | 35% in 2" | 217 | 95 |
317L | S31703 | 75 | 30 | 35% in 2" | 217 | 95 |
321 | S32100 | 75 | 30 | 40% in 2" | 183 | 88 |
347 | S34700 | 75 | 30 | 40% in 2" | 183 | 88 |
410* | S41000 | 65 | 30 | 20% in 2" | 217 | 95 |
410S | S41008 | 60 | 30 | 22% in 2" | 183 | 88 |
416 | S41600 | 75 | 40 | 30-25% in 2" | - | 82 |
420 | S42000 | 95 | 60 | 30-25% in 2" | - | 92 |
430 | S43000 | 65 | 30 | 22% in 2" | 183 | 88 |
440C | S44004 | - | - | - | - | - |
Export Destination of Austenitic Stainless Steel Bar Shafts
Ellite Alloys Supplies Austenitic Stainless Steel Bar Shafts in Agartala, Agra, Agra Rampur, Ahmedabad, Aizawl, Ajmer, Aligarh, Allahabad, Alwar, Amaravati, Ambala, Ambattur, Ambernath, Amravati, Amritsar, Aurangabad, Bangalore, Bareilly, Belgaum, Bhagalpur, Bhavnagar, Bhilai, Bhiwandi, Bhopal, Bhubaneswar, Bidhannagar, Biharsharif, Bikaner, Bilaspur, Bokaro, Chandigarh, Chennai, Chittoor, Coimbatore, Cuttack, Dahod, Davanegere, Dehradun, Delhi, Dhanbad, Dharamsala, Dindigul, Diu, Durgapur, Erode, Faridabad, Fatehpur, Gandhidham, Gandhinagar, Ghaziabad, Greater Hyderabad, Greater Mumbai, Greater Warangal, Gurgaon, Guwahati, Gwalior, Haldia, Howrah, Hubballi-Dharwad, Hyderabad, Imphal, Indore, Jabalpur, Jaipur, Jalandhar, Jammu, Jamnagar, Jamshedpur, Jhansi, Jodhpur, Junagadh, Kakinada, Kalyan-Dombivali, Kanpur, Karnal, Kavaratti, Kochi, Kohima, Kolhapur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Mehsana, Mangalore, Mangaluru, Mira-Bhayandar, Moradabad, Morbi, Mumbai, Muzaffarpur, Mysore, Nagpur, Namchi, Nasik, Navi Mumbai, NDMC, Nellore, New Delhi, New Town Kolkata, Noida, Oulgaret, Pali, Panaji, Panipat, Panvel, Pasighat, Patiala, Patna, Pimpri-Chinchwad, Port Blair, Puducherry, Pune, Raipur, Rajkot, Ranchi, Raurkela, Industrial Township, Rourkela, Sagar, Salem, Satna, Secunderabad, Shaharanpur, Shillong, Siliguri, Silvassa, Solapur, Srinagar, Surat, Thane, Thanjavur, Thiruvananthapuram, Thoothukudi, Thrissur, Tiruchirapalli, Tirunelveli, Tirupur, Tumkur, Udaipur, Ujjain, Ulhasnagar, Vadodara, Vapi, Varanasi, Vasai-Virar, Vellore, Vishakhapatnam.
Ellite Alloys exports Austenitic Stainless Steel Bar Shafts to Countries like India, United States, United Arab Emirates, Canada, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Stainless Steelgeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Saudi Arabia, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Stainless Steelgeria, Mexico, Turkey, Hungary, Algeria, Angola, Argentina, Austria, Azerbaijan, Bangladesh, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia.
For any enquiries related to Austenitic Stainless Steel Bar Shafts, kindly contact us on :-