The Duplex stainless steel bar is a combination that has comparable erosion protection of the 304 composite. It additionally has a grain microstructure of austenitic and ferritic stainless steels. It is normally utilized as a part of businesses for applications including, mash and paper, therapeutic hardware, impellers, rotors and shafts. Its superb erosion protection and high quality settle on it astounding decisions in an assortment of utilizations.
There's for all intents and purposes no molybdenum and a low substance of nickel in this review of metal, which makes it a more financially savvy choice that 304 and 316 composites (for a few kinds of utilizations). Rather than the nickel and molybdenum giving it its high consumption protection, the nickel is supplanted with manganese and molybdenum supplanted with nitrogen.
The yield quality of duplex stainless steels is twofold that of the 316 and 304 austenitic combination grades. Contrasted with 304 and 316, this amalgam has general erosion protection in the larger part of conditions. It has incredible restricted consumption protection, for example, setting, intergranular and cleft erosion. The setting protection identical for this combination is 26, which is somewhat higher than 316 stainless steel. In any case, the setting and fissure consumption protection sits between that of 316 and 304 amalgams. It can be utilized as a part of chloride conditions without the danger of stress erosion breaking (SCC) when in temperatures up to 212 degrees F. It can likewise be utilized as a part of conditions that would ordinarily prompt untimely disappointment for austenitic steel grades.
Grades | 2205 |
---|---|
UNS NO | S31803 / S32205 |
Range | Dia 6mm to 300mm (100mm to 1200mm long) |
Form | Round, Square, Hex, Flat, Forged, Bright, Black, Wire |
Finish | Bright Bar, Forged Bar & Black Bar |
Classification | Specification | Chemical Composition | other | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
JIS | AISI | C | Si | Mn | P | S | Ni | Cr | Mo | Cu | N | ||
Martensitic Grades | SUS403 | 403 | Max.0.15 | Max.0.50 | Max.1.00 | Max.0.040 | Max.0.030 | (1) | 11.50~13.00 | - | - | - | - |
SUS410 | 410 | Max.0.15 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | (1) | 11.50~13.50 | - | - | - | - | |
SUS410J1 | - | 0.08~0.18 | Max.0.60 | Max.1.00 | Max.0.040 | Max.0.030 | (1) | 11.50~14.00 | 0.30~0.60 | - | - | - | |
SUS410F2 | - | Max.0.15 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | (1) | 11.50~13.50 | - | - | - | Pb 0.05˜0.30 | |
SUS416 | 416 | Max.0.15 | Max.1.00 | Max.1.25 | Max.0.060 | Min.0.15 | (1) | 12.00~14.00 | (2) | - | - | - | |
SUS420J1 | 420 | 0.16~0.25 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | (1) | 12.00~14.00 | - | - | - | - | |
SUS420J2 | 420 | 0.26~0.40 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | (1) | 12.00~14.00 | - | - | - | - | |
SUS420F | 420F | 0.26~0.40 | Max.1.00 | Max.1.25 | Max.0.060 | Min.0.15 | (1) | 12.00~14.00 | (2) | - | - | - | |
SUS420F2 | - | 0.26~0.40 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | (1) | 12.00~14.00 | - | - | - | Pb 0.05~0.30 | |
SUS431 | 431 | Max.0.20 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | 1.25~2.50 | 15.00~17.00 | - | - | - | - | |
SUS440A | 440A | 0.60~0.75 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | (1) | 16.00~18.00 | (3) | - | - | - | |
SUS440B | 440B | 0.75~0.95 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | (1) | 16.00~18.00 | (3) | - | - | - | |
SUS440C | 440C | 0.95~1.20 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | (1) | 16.00~18.00 | (3) | - | - | - | |
SUS440F | S44020 | 0.95~1.20 | Max.1.00 | Max.1.25 | Max.0.060 | Min.0.15 | (1) | 16.00~18.00 | (3) | - | - | - | |
Ferritic Grades | SUS405 | 405 | Max.0.08 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | - | 11.50~14.50 | - | - | - | Al 0.10~0.30 |
SUS410L | - | Max.0.03 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | - | 11.00~13.50 | - | - | - | - | |
SUS430 | 430 | Max.0.12 | Max.0.75 | Max.1.00 | Max.0.040 | Max.0.030 | - | 16.00~18.00 | - | - | - | - | |
SUS430F | 430F | Max.0.12 | Max.1.00 | Max.1.25 | Max.0.060 | Min.0.15 | - | 16.00~18.00 | (2) | - | - | - | |
SUS434 | 434 | Max.0.12 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | - | 16.00~18.00 | 0.75~1.25 | - | - | - | |
SUS447J1 | - | Max.0.01 | Max.0.40 | Max.0.40 | Max.0.030 | Max.0.020 | - | 28.50~32.00 | 1.50~2.50 | - | Max.0.015 | - | |
SUSXM27 | - | Max.0.01 | Max.0.40 | Max.0.40 | Max.0.030 | Max.0.020 | - | 25.00~27.50 | 0.75~1.50 | - | Max.0.015 | - | |
Austenitic Ferritic Grades | SUS329J1 | 329 | Max.0.08 | Max.1.00 | Max.1.50 | Max.0.040 | Max.0.030 | 3.00~6.00 | 23.00~28.00 | 1.00~3.00 | - | - | - |
SUS329J3L | S31803 | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.040 | Max.0.030 | 4.50~6.50 | 21.00~24.00 | 2.50~3.50 | - | 0.08~0.20 | - | |
SUS329J4L | S31260 | Max.0.03 | Max.1.00 | Max.1.50 | Max.0.040 | Max.0.030 | 5.50~7.50 | 24.00~26.00 | 2.50~3.50 | - | 0.08~0.30 | - | |
Austenitic Grades | SUS201 | 201 | Max.0.15 | Max.1.00 | 5.50~7.50 | Max.0.060 | Max.0.030 | 3.50~5.50 | 16.00~18.00 | - | - | 0.25?? | - |
SUS202 | 202 | Max.0.15 | Max.1.00 | 7.50~10.00 | Max.0.060 | Max.0.030 | 4.00~6.00 | 17.00~19.00 | - | - | Max.0.25 | - | |
SUS301 | 301 | Max.0.15 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 6.00~8.00 | 16.00~18.00 | - | - | - | - | |
SUS302 | 302 | Max.0.15 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 8.00~10.00 | 17.00~19.00 | - | - | - | - | |
SUS303 | 303 | Max.0.15 | Max.1.00 | Max.2.00 | Max.0.200 | Min.0.15 | 8.00~10.00 | 17.00~19.00 | (2) | - | - | - | |
SUS303Se | 303Se | Max.0.15 | Max.1.00 | Max.2.00 | Max.0.200 | Max.0.060 | 8.00~10.00 | 17.00~19.00 | - | - | - | Se Min.0.15 | |
SUS303Cu | - | Max.0.15 | Max.1.00 | Max.3.00 | Max.0.200 | Min.0.15 | 8.00~10.00 | 17.00~19.00 | (2) | 1.50~3.50 | - | - | |
SUS304 | 304 | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 8.00~10.50 | 18.00~20.00 | - | - | - | - | |
SUS304L | 304L | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 9.00~13.00 | 18.00~20.00 | - | - | - | - | |
SUS304N1 | 304N | Max.0.08 | Max.1.00 | Max.2.50 | Max.0.045 | Max.0.030 | 7.00~10.50 | 18.00~20.00 | - | - | 0.10~0.25 | - | |
SUS304N2 | - | Max.0.08 | Max.1.00 | Max.2.50 | Max.0.045 | Max.0.030 | 7.50~10.50 | 18.00~20.00 | - | - | 0.15~0.30 | Nb Max.0.15 | |
SUS304LN | 304LN | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 8.50~11.50 | 17.00~19.00 | - | - | 0.12~0.22 | - | |
SUS304J3 | - | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 8.00~10.50 | 17.00~19.00 | - | 1.00~3.00 | - | - | |
SUS305 | 305 | Max.0.12 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 10.50~13.00 | 17.00~19.00 | - | - | - | - | |
SUS309S | 309S | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 12.00~15.00 | 22.00~24.00 | - | - | - | - | |
SUS310S | 310S | Max.0.08 | Max.1.50 | Max.2.00 | Max.0.045 | Max.0.030 | 19.00~22.00 | 24.00~26.00 | - | - | - | - | |
SUS316 | 316 | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 10.00~14.00 | 16.00~18.00 | 2.00~3.00 | - | - | - | |
SUS316L | 316L | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 12.00~15.00 | 16.00~18.00 | 2.00~3.00 | - | - | - | |
SUS316N | 316N | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 10.00~14.00 | 16.00~18.00 | 2.00~3.00 | - | 0.10~0.22 | - | |
SUS316LN | 316LN | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 10.50~14.50 | 16.50~18.50 | 2.00~3.00 | - | 0.12~0.22 | - | |
SUS316Ti | - | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 10.00~14.00 | 16.00~18.00 | 2.00~3.00 | - | - | Ti Min.5xC% | |
SUS316J1 | - | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 10.00~14.00 | 17.00~19.00 | 1.20~2.75 | 1.00~2.50 | - | - | |
SUS316J1L | - | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 12.00~16.00 | 17.00~19.00 | 1.20~2.75 | 1.00~2.50 | - | - | |
SUS316F | - | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Min.0.10 | 10.00~14.00 | 16.00~18.00 | 2.00~3.00 | - | - | - | |
SUS317 | 317 | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 11.00~15.00 | 18.00~20.00 | 3.00~4.00 | - | - | - | |
SUS317L | 317L | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 11.00~15.00 | 18.00~20.00 | 3.00~4.00 | - | - | - | |
SUS317LN | - | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 11.00~15.00 | 18.00~20.00 | 3.00~4.00 | - | 0.10~0.22 | - | |
SUS317J1 | - | Max.0.04 | Max.1.00 | Max.2.50 | Max.0.045 | Max.0.030 | 15.00~17.00 | 16.00~19.00 | 4.00~6.00 | - | - | - | |
SUS836L | - | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 24.00~26.00 | 19.00~24.00 | 5.00~7.00 | - | Max.0.25 | - | |
SUS890L | - | Max.0.02 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 23.00~28.00 | 19.00~23.00 | 4.00~5.00 | 1.00~2.00 | - | - | |
SUS321 | 321 | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 9.00~13.00 | 17.00~19.00 | - | - | - | Ti Min.5xC% | |
SUS347 | 347 | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 9.00~13.00 | 17.00~19.00 | - | - | - | Nb Min.10xC% | |
SUSXM7 | 304Cu | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 8.50~10.50 | 17.00~19.00 | - | 3.00~4.00 | - | - | |
SUSXM15J1 | - | Max.0.08 | 3.00~5.00 | Max.2.00 | Max.0.045 | Max.0.030 | 11.50~15.00 | 15.00~20.00 | - | - | - | - | |
Precipitation Hardening Grades | SUS630 | S17400 | Max.0.07 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | 3.00~5.00 | 15.00~17.50 | - | 3.00~5.00 | - | Nb 0.15~0.45 |
SUS631 | S17700 | Max.0.09 | Max.1.00 | Max.1.00 | Max.0.040 | Max.0.030 | 6.50~7.75 | 16.00~18.00 | - | - | - | Al 0.75~1.50 |
Type | UNS | Tensile (ksi) min |
Yield (ksi) min |
Elongation min |
Hardness (Brinell) max |
Hardness (Rockwell B) max |
302 | S30200 | 75 | 30 | 40% in 2" | 183 | 88 |
304* | S30400 | 75 | 30 | 40% in 2" | 183 | 88 |
304L* | S30403 | 70 | 30 | 40% in 2" | 183 | 88 |
309 | S30900 | 75 | 30 | 40% in 2" | 217 | 95 |
309S | S30908 | 75 | 30 | 40% in 2" | 217 | 95 |
310 | S31000 | 75 | 30 | 40% in 2" | 217 | 95 |
310S | S31008 | 75 | 30 | 40% in 2" | 217 | 95 |
316* | S31600 | 75 | 30 | 40% in 2" | 217 | 95 |
316L* | S31603 | 70 | 25 | 35% in 2" | 217 | 95 |
317 | S31700 | 75 | 30 | 35% in 2" | 217 | 95 |
317L | S31703 | 75 | 30 | 35% in 2" | 217 | 95 |
321 | S32100 | 75 | 30 | 40% in 2" | 183 | 88 |
347 | S34700 | 75 | 30 | 40% in 2" | 183 | 88 |
410* | S41000 | 65 | 30 | 20% in 2" | 217 | 95 |
410S | S41008 | 60 | 30 | 22% in 2" | 183 | 88 |
416 | S41600 | 75 | 40 | 30-25% in 2" | - | 82 |
420 | S42000 | 95 | 60 | 30-25% in 2" | - | 92 |
430 | S43000 | 65 | 30 | 22% in 2" | 183 | 88 |
440C | S44004 | - | - | - | - | - |
Export Destination of Stainless Steel Duplex Bar
Ellite Alloys Supplies Stainless Steel Duplex Bar in Agartala, Agra, Agra Rampur, Ahmedabad, Aizawl, Ajmer, Aligarh, Allahabad, Alwar, Amaravati, Ambala, Ambattur, Ambernath, Amravati, Amritsar, Aurangabad, Bangalore, Bareilly, Belgaum, Bhagalpur, Bhavnagar, Bhilai, Bhiwandi, Bhopal, Bhubaneswar, Bidhannagar, Biharsharif, Bikaner, Bilaspur, Bokaro, Chandigarh, Chennai, Chittoor, Coimbatore, Cuttack, Dahod, Davanegere, Dehradun, Delhi, Dhanbad, Dharamsala, Dindigul, Diu, Durgapur, Erode, Faridabad, Fatehpur, Gandhidham, Gandhinagar, Ghaziabad, Greater Hyderabad, Greater Mumbai, Greater Warangal, Gurgaon, Guwahati, Gwalior, Haldia, Howrah, Hubballi-Dharwad, Hyderabad, Imphal, Indore, Jabalpur, Jaipur, Jalandhar, Jammu, Jamnagar, Jamshedpur, Jhansi, Jodhpur, Junagadh, Kakinada, Kalyan-Dombivali, Kanpur, Karnal, Kavaratti, Kochi, Kohima, Kolhapur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Mehsana, Mangalore, Mangaluru, Mira-Bhayandar, Moradabad, Morbi, Mumbai, Muzaffarpur, Mysore, Nagpur, Namchi, Nasik, Navi Mumbai, NDMC, Nellore, New Delhi, New Town Kolkata, Noida, Oulgaret, Pali, Panaji, Panipat, Panvel, Pasighat, Patiala, Patna, Pimpri-Chinchwad, Port Blair, Puducherry, Pune, Raipur, Rajkot, Ranchi, Raurkela, Industrial Township, Rourkela, Sagar, Salem, Satna, Secunderabad, Shaharanpur, Shillong, Siliguri, Silvassa, Solapur, Srinagar, Surat, Thane, Thanjavur, Thiruvananthapuram, Thoothukudi, Thrissur, Tiruchirapalli, Tirunelveli, Tirupur, Tumkur, Udaipur, Ujjain, Ulhasnagar, Vadodara, Vapi, Varanasi, Vasai-Virar, Vellore, Vishakhapatnam.
Ellite Alloys exports Stainless Steel Duplex Bar to Countries like India, United States, United Arab Emirates, Canada, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Stainless Steelgeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Saudi Arabia, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Stainless Steelgeria, Mexico, Turkey, Hungary, Algeria, Angola, Argentina, Austria, Azerbaijan, Bangladesh, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia.
For any enquiries related to Stainless Steel Duplex Bar, kindly contact us on :-